Tojiro Shirogami Yanagiba Review: A Real Sushi Knife for About $100
A made-in-Japan white steel yanagiba with a crisp shinogi line and a true concave back, at a price that lets you learn single-bevel sharpening without fear.
By Burrfection EditorialOctober 22, 2016Updated November 21, 20263 min read
This article contains affiliate links: I may earn a commission if you buy through them, at no extra cost to you. How this works

The short version
- The Tojiro shirogami yanagiba is a real Japanese sushi knife for around $100. White #2 steel, made in Japan, with a well-defined shinogi line and a proper concave back.
- The handle is where the savings show. A plastic ferrule with a noticeable step and a fit and finish I'd rate about a 6 out of 10, but with nicely hand-engraved logos.
- It's the knife to learn on. Sharpen it, resharpen it and redo the edge over and over before you spend $300 or more on a yanagiba.
Why a Tojiro after a Masamoto
Every Japanese knife lover should own at least one yanagiba, the long, single-bevel slicer sushi chefs use (0:00). My previous one was a Masamoto KK yanagiba, which went to a subscriber training to become a sushi chef. Instead of buying another $300 Masamoto, I picked up this yanagiba from Tojiro for around $100 to $120.
Steel, ferrule and handle
Just from looking at it, it's a beautifully crafted knife, and I believe the steel is white #2, a very standard, good, fine carbon steel (1:30). The ferrule is resin, essentially a high-grade plastic, which is fine. There's a small step between the ferrule and the handle, just enough to feel if you run your finger along the knife. Even though it's a cheap ferrule, I actually like the material, because it has a nice tactile grip. And it's made in Japan, which matters.
The shinogi line and the concave back
The shinogi line, the ridge where the bevel meets the flat of the blade, is very nicely defined (2:12). Look closely at the back of the blade and you'll see a thin polished strip, about a millimeter wide, running along the edge all the way down. That tells me the knife has a proper concave back (the ura), which is exactly what you want on a single-bevel knife. Overall the fit and finish is decent. For the handle I'd give it about a 6 out of 10, but the hand-engraved logos are a really nice touch at this price.
270mm or 300mm?
This one is 270mm (3:14). I don't have a large kitchen, my cutting board is only so big, and a longer knife gets cumbersome at home. If you work in a sushi restaurant, or have a big kitchen, go for the 300mm. It won't cut any better, it just gives you more length for a large slab of salmon or tuna. For me, a knife that fits my space matters more than length, and what matters most is how sharp I can get it and how well I can maintain the edge. I don't cut sushi that often, but I smoke salmon once or twice a month, and a good yanagiba is very nice to have around for that.
The best reason to buy it: learning to sharpen
When you're starting out, it isn't wise to buy a $1,000 knife, or a $1,000 set of knives, before you know how to sharpen them (4:18). Whether it's a yanagiba, a chef knife or a paring knife, buy something affordable that you can sharpen, resharpen and redo over and over until your technique is perfect. That's exactly why I bought this one: as a knife to sharpen and perfect my own technique. When you're ready, my yanagiba sharpening guide walks through the single-bevel process step by step.
Bottom line
The Tojiro shirogami yanagiba gives you white #2 steel, a crisp shinogi line and a real concave back for around $100, with a plastic ferrule and an average handle as the trade-off. It's a genuine sushi knife and the best kind of practice knife. When you're ready to step up, browse the yanagibas at the Burrfection Store or the yanagiba knives on Gyuto.com.
First access
Private drops, new knives and sales
Get them from Burrfection and our retail partners before anyone else. No spam; unsubscribe anytime.
Emails from Burrfection Inc. See privacy.


